Rebar Couplers
Rebar Couplers
-
Quick ViewBolted Couplers
Read moreVruddhi bolted couplers are utilized to connect two reinforcing bars end-to-end when one bar is already cast in place and there is inadequate space to use a hydraulic cold press... -
Quick ViewCold Forged Couplers
Read moreVruddhi Cold Forged Couplers are used for rebar splicing with proven performance under compression, tension, cyclic, and fatigue loads. The rebar ends are enlarged by cold forging and then threaded,... -
Quick ViewGroutFit Couplers
Read moreVruddhi GroutFit Couplers are specially designed for connecting GroutFit elements. These half grout system coupler have one threaded end and the other end is a hollow cavity for connecting two... -
Quick ViewParallel Roll Threaded Coupler
Read moreVruddhi Parallel Threaded Couplers are designed for connecting reinforcement bars from Ø 16 mm to 40 mm. The rebar threads are parallel threaded by a roller threading machine, supported by... -
Quick ViewTaper Threaded Couplers
Read moreIt uses self-aligning taper threads to join two reinforcement bars with positive locking. Vruddhi taper threaded couplers provide consistent performance and are easy to install. -
Quick ViewVruddhi Hydraulic Crimping Couplers
Read moreOur Cold Extrusion Hydraulic Press connects two non-threaded rebars using a hydraulic power pack and a handheld jack on-site for crimping.