- Our Couplers are suitable to join the reinforcement bars end to end.
- Couplers are an efficient and cost-effective alternative for overlapping joints.
- Rebar Couplers are readily available for rebar diameter ranging from 16 mm to 40mm.
- Build a “Greener” and a “Lighter” structure by significantly reducing the consumption of steel.
- We can customize our products to meet your specific requirement.
Products
Conventional Splicing
Vruddhi Rebar Couplers are suitable to join the reinforcement bars end to end. Couplers are an efficient alternative for traditional lap splice or overlapping joints. Cost benefit analysis show that use of threaded rebar couplers is a cost effective method as compared to old method of lap splicing / overlapping joints.
Mechanical Splicing
Vruddhi Rebar Couplers are readily available for rebar diameter ranging from 16 mm to 40mm. We can customize our products to meet your specific requirement.
Cost Saving Opportunity - 46 D
| Rebar Size (mm) | Lapping (m) | Wastage of TMT per Joint (Kg) | Cost per Joint (Rs) |
|---|---|---|---|
| 40 | 1.84 | 18.11 | 906 |
| 32 | 1.5 | 9.5 | 475 |
| 25 | 1.1 | 4.2 | 210 |
| 20 | 0.9 | 2.2 | 110 |
| 16 | 0.7 | 1.1 | 55 |
Cost Saving Opportunity - 40D
| Rebar Size (mm) | Lapping (m) | Wastage of TMT per Joint (Kg) | Cost per Joint (Rs) |
|---|---|---|---|
| 40 | 1.6 | 15.75 | 788 |
| 32 | 1.3 | 8.2 | 410 |
| 25 | 1.0 | 3.9 | 195 |
| 20 | 0.8 | 2.0 | 100 |
| 16 | 0.7 | 1.0 | 50 |
Benefits
Cost saving – Lesser steel consumption
Higher UTS than that of parent rebar
Shortens project timeline
No torque wrench required
Solves bar congestion
Improvement in concrete flow
Loading